Switching EICR software without retyping your client list: what to check on importing old certificates, reinspections, misreads and signing, with a trial plan.
If you've been doing EICRs for a few years, you're sitting on a pile of them. Some are PDFs from an old system, some are scanned paper, some are photos of a form you filled in on a landlord's stairs. The usual advice on choosing EICR software assumes you're starting from nothing. You aren't, and the thing that decides whether a switch is painless is what happens to those old certificates.
We've already covered how to create an EICR digitally and compared the best EICR software for electricians in 2026. This guide is narrower: a checklist for switching without retyping a whole client list. Zappy makes Zappy Pro Tools, so we have a commercial interest, and we've kept the Zappy mentions to the parts that are relevant.
Every package can produce a tidy EICR. The difference shows up on the second visit to a property. A landlord with four flats comes round again at the next inspection (rented homes in England need one at least every five years, or sooner if the report says so), and you want the client details, the installation address, the boards and the circuit list already there. Retyping a 24-way board from last time is the slowest part of a reinspection, and it's where typos creep in.
So the question to ask any vendor is simple: can I get my existing records in, and what do I get out the other end?
Ask what formats it accepts. Photos of paper certificates and PDFs are the two you'll meet most. If the only route in is a proprietary export from a rival system, it's no use to you if your old records are scans.
In Zappy Pro Tools, you tap the ⋯ menu in Certificates, choose Import a certificate, then take photos or pick a PDF. It's read in the background, so you can carry on with other work, and the result waits in your Needs you list.
Reading handwriting and faded print is never perfect. You want a preview of the extracted data beside the original page, so you can check it line by line. Without that, you're trusting the machine blind.
This is the question that separates careful software from risky software. A value that's smudged or ambiguous should be left blank and flagged, not guessed. A confident wrong Zs reading is worse than an empty box, because nobody goes looking for it.
In Zappy Pro Tools, anything unclear is listed at the top of the review, and a value that can't be read with certainty stays blank. Your edits save as you go.
Look for what's kept once you approve the import. Ideally the client and installation are created, with the boards and circuits, ready for the next certificate. In Zappy Pro Tools, saving adds those records, and the original readings stay on the historic record rather than being copied forward as if they were new.
Importing is only half the saving. The payoff is the reinspection.
• Can you start a new EICR from an imported or previous certificate?
• Do client, installation, boards and circuits come across?
• Are the test readings blank, so nothing old is carried forward by accident?
• Are last time's observations available to answer (still present, improved, resolved)?
• Does the original certificate stay unchanged?
Zappy Pro Tools does this from an imported EICR: the details come across with the readings blank, and last time's observations are there for you to answer. Blank readings are the right default. Old test results are not this year's test results, and a system that pre-fills them invites mistakes.
Software, including anything with AI reading, doesn't make the inspection or the judgement. You test, you code the observations, you decide the outcome and you sign. Be wary of any tool that implies otherwise. Read the import preview as you would a junior's paperwork: useful, and yours to verify. We go into the limits in how AI can speed up electrical certificates.
Your certificate should record the test instruments used. Check you can save instrument serial numbers once and pick them again, rather than typing them every job. Also check it works across the certificate types you issue, as an EIC and a Minor Works certificate need them too.
Ask these before you pay, not after:
• Can you edit any field after import, and does the edit save?
• Is there a clear record of what was changed?
• Can you fix a certificate you've already issued, or only reissue?
• Who do you contact, and how quickly, when an import misreads a page?
Misreads will happen on poor scans. What matters is that they're visible and fixable.
Cellars, lofts and farmhouses don't care about your data plan, so ask any vendor how its app behaves with no signal. Our electrical certificate app guide covers that checklist, and the software buying checklist covers the rest.
• Pick one past EICR with a landlord you'll see again.
• Import it and check every value against the original.
• Note which fields were left blank and whether they were ones you'd have struggled to read yourself.
• Start a reinspection from it and see how much typing is left.
• Only then decide whether to move the rest.
If the trial saves you the board and circuit entry on one job, repeat landlord work is where the time comes back. Our piece on turning one landlord into a long-term EICR client shows why that repeat work is worth organising for.
Do I have to import every old certificate? No. Import the ones for clients you expect to see again. Old records for one-off jobs can stay as they are.
Will imported readings carry into the new EICR? Not in Zappy Pro Tools. The reinspection starts with readings blank, and you test and enter them fresh.
Can I rely on the imported data without checking? No. Check it beside the original every time, and you remain responsible for the certificate you sign.
Is there a cost to try it? Zappy Pro Tools has a free tier and a paid Zappy Pro upgrade. Check the current details on the Pro Tools page.
Start free: the app for UK electricians