Electrical certificate software: Every certificate, done on site. Signed before you leave.

EICR, EIC, Minor Works, PAT and more, laid out like the official forms. Photograph the board and the circuits are drafted for you, and the signed PDF goes from your phone. Free plan, no card needed. 100+ electricians run their business on Zappy.

One app for every certificate you issue.

Each type has its own page with everything on the form.

EICRs drafted from a photo of the board. Photograph the consumer unit and AI drafts the circuit list. You add the readings and check every line.

EICs with every board on one form. Add the garage board or a sub-main. Each board gets its own schedules on the PDF.

Minor Works with Max Zs looked up. Enter the device and the maximum Zs comes from BS 7671 Table 41.3, with a warning if your reading is over.

PAT registers from your tester's sheet. Photograph the paper sheet or pick the tester's PDF, and every appliance lands in the register.

Fire alarm, emergency lighting and EV too. Installation and periodic certificates for fire alarms and emergency lighting, EV charge points and danger notifications.

Renewals that book themselves. When a certificate is due again, your client gets a reminder with your booking link in it. (Zappy Pro)

The certificate, and everything after it.

Quote the remedial work, invoice the inspection and chase the payment, in the same app.

Certificates that match the official forms

EICR, EIC, Minor Works, PAT and EV charge point certificates laid out like the model forms, plus fire alarm, emergency lighting and danger notifications. Fill them in on site and send the signed PDF before you leave.

Board photo to schedule. Photograph the consumer unit and the circuits land in the schedule, ready for your readings.

Readings checked as you go. Max Zs fills in from the breaker, and any reading over its limit is listed before you sign.

Building control on time. Issue an EIC and Zappy reminds you to notify through your scheme, with the 30-day deadline.

Next year's starts from this one. Start a reinspection from last time's EICR with the boards and circuits already in.

EICR: Condition reports with observations, codes and photos.

EIC: Installation certificates, with more than one board when you need it.

Minor Works: The one-page certificate for a single circuit or an addition.

PAT: A register filled from photos of rating plates, the tester or your test sheet.

Quotes, accepted online

Say what the job is and Zappy drafts the quote. Price materials from trade prices, add extras they can tick, send it by email or text, and your client signs, books and pays the deposit from their phone.

Talk, don't type. Describe the job out loud. Zappy drafts the lines and you check the prices.

Materials at trade prices. Typical UK trade prices for cable, boards, accessories and EV chargers, with your markup added.

Sent where clients reply. Send by WhatsApp or email. The link preview carries your logo.

Declined? You'll know why. Clients can decline with a reason, and the follow-ups for that quote stop.

Invoices with a Pay button

Every invoice has a card payment link, straight to your Stripe. Deposits and part payments come off the balance on their own.

Card payments, to your account. Clients pay by card from the invoice, and the money goes to your own Stripe account.

Paid in instalments? Fine.. Record bank transfers, cash or card as they come in. The balance updates itself.

Credit notes done properly. Take money off a sent invoice with its own number and PDF, without editing the original.

Ready for your accountant. Export a tax year with VAT and CIS in their own columns, or send invoices to Xero or QuickBooks on Pro.

Chasing that runs itself (Zappy Pro)

Set it once. Emails go out in your name until the invoice is paid or the quote gets an answer.

Unpaid invoices. Reminders 3, 7 and 14 days after the due date. They stop when it's paid.

Quiet quotes. A nudge 2 and 5 days after you send, so a good quote doesn't go cold.

Review requests. A couple of days after a job is paid, your client is asked for a review.

Renewals. Before a certificate runs out, your client is reminded and can book the re-test.

Appointment texts: A text or email when you book, move or cancel a visit, a reminder before you arrive, and On my way on the day.

Every email in your words: Change the timing and the wording in the builder. They go out in your name.

Jobs and calendar

The quote, bookings, certificates and invoices for the same work sit together in a job, with the next thing to do. Your calendar and booking page keep the visits in order.

Your own booking page. Clients pick a visit type and a free slot in your brand colour, and it lands in your calendar.

Call or directions in one tap. From any booking. Mark it done, cancelled or a no-show afterwards.

What each job made, on Pro. Add materials and costs to a job and see the profit, not just the invoice total.

One app, instead of three bills

A typical setup is a certificate app from about £18 a month, a job management app from about £28 a month, a separate way to take card payments, and leads paid for one by one. On Zappy, certificates, quotes, invoices and card payments are in one app: £0 to start, £7.99 a month on Pro.

Free to start. Pro when you're busy.

Free: 5 quotes and 5 invoices a month, 2 certificates a month and 5 AI actions a month. No card needed.

Zappy Pro, £7.99 a month, with a 7-day free trial: unlimited quotes, invoices and certificates, unlimited AI (subject to fair use), automatic payment reminders and accounting sync. Cancel before day 8 and you pay nothing.

Local jobs, live in South Yorkshire. More areas coming. On both plans you only pay when you choose to quote.

Do the next certificate on site.

Get Zappy for iPhone on the App Store, or start free in your browser.

Certificate app questions electricians ask

Which certificates can I issue?

EICR, EIC, Minor Works, PAT, EV charge point, fire alarm and emergency lighting certificates (installation and periodic), and electrical danger notifications. Fill them in on a phone, tablet or laptop, with or without signal, then sign and send the PDF.

Do they match the official forms?

They're laid out like the model forms, following BS 7671:2018+A4:2026, with your business details, scheme number and logo at the top, and the report number on every page.

How accurate is the AI board scan?

It reads the labels and breakers from a photo of the board and drafts the circuit list as a starting point. It never fills in readings: you add those, and every field stays editable before you sign.

Do I need to be registered with a scheme?

No. Anyone can use the certificate tools. If you're with NICEIC, NAPIT or another scheme, add your number and logo in Settings and they print on every certificate.

Is the certificate app free?

Yes, there's a free plan you keep, with a set number of certificates every month and no card needed. Zappy Pro is £7.99 a month for unlimited certificates of every type, and you can try it free for 7 days.

Is there an app to download?

Yes, on iPhone: get Zappy for Electricians from the App Store and sign in with your Zappy account. It works with no signal, and syncs between your phone, tablet and laptop. On Android and computers, Zappy runs in the browser and adds to your home screen like any other app.

Start free
Zappy